PartsTable
Technical Data Sheet
PartsTable / MRO / 18D180
18D180 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, body_length: 0.375 INCHES NOMINAL IN, body_diameter: 1.375 INCHES NOMINAL IN, bore_diameter: 25.00 MILLIMETERS NOMINAL MM, overall_width: 17.0 MILLIMETERS NOMINAL MM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-114-5997, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 18D180
NSN: 3110-00-114-5997
FSC: 3110
CAGE: 45396 — GRUNDFOS CBS, INC DBA PACO PUMPS (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
body_length0.375 INCHES NOMINAL IN
body_diameter1.375 INCHES NOMINAL IN
bore_diameter25.00 MILLIMETERS NOMINAL MM
overall_width17.0 MILLIMETERS NOMINAL MM
seal_quantity2
terminal_typeTAB, SOLDER LUG
inclosure_typeENCAPSULATED
load_directionRADIAL
surface_finishGROUND
terminal_length0.375 INCHES NOMINAL IN
NSN3110-00-114-5997
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 18D180 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MATERIAL: STEEL OUTER RING
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
OVERALL WIDTH17.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL OUTER RING
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
MATERIALSTEEL RETAINER
MATERIALRUBBER SYNTHETIC SEAL
MATERIALSTEEL INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
27015Interchangeable
interchangeable cross-reference
interchangeable
6305ZZInterchangeable
interchangeable cross-reference
interchangeable
8700P1Interchangeable
interchangeable cross-reference
interchangeable
305SFFInterchangeable
interchangeable cross-reference
interchangeable
J17Interchangeable
interchangeable cross-reference
interchangeable
3820-000A551Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 18D180?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 18D180?
18D180 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 18D180?
There are 34 known substitutes for 18D180: 27015, 6305ZZ, 8700P1 and 31 more. Substitute compatibility should be verified for your specific system.
Is 18D180 still available?
18D180 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 18D180

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026