PartsTable
Technical Data Sheet
PartsTable / COMPONENT / J17
J17 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include phase: SINGLE INPUT, material: STEEL BALL, bore_shape: STRAIGHT, duty_cycle: CONTINUOUS, flat_depth: 0.0200 INCHES NOMINAL SINGLE END IN, power_rating: 0.0200 HORSEPOWER OUTPUT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-114-5997, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J17
NSN: 3110-00-114-5997
FSC: 3110
CAGE: 12183 — HALPRIN SUPPLY CO (USA)
SPECIFICATIONS
phaseSINGLE INPUT
materialSTEEL BALL
bore_shapeSTRAIGHT
duty_cycleCONTINUOUS
flat_depth0.0200 INCHES NOMINAL SINGLE END IN
power_rating0.0200 HORSEPOWER OUTPUT
winding_typeINDUCTION-SQUIRREL CAGE
bore_diameter25.00 MILLIMETERS NOMINAL MM
overall_width3.310 INCHES IN
seal_quantity2
cooling_methodNATURAL CONVECTION VENTILATED
load_directionRADIAL
NSN3110-00-114-5997
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: J17 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MATERIAL: STEEL OUTER RING
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
OVERALL WIDTH17.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL OUTER RING
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
MATERIALSTEEL RETAINER
MATERIALRUBBER SYNTHETIC SEAL
MATERIALSTEEL INNER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
27015Interchangeable
interchangeable cross-reference
interchangeable
6305ZZInterchangeable
interchangeable cross-reference
interchangeable
8700P1Interchangeable
interchangeable cross-reference
interchangeable
305SFFInterchangeable
interchangeable cross-reference
interchangeable
J17Interchangeable
interchangeable cross-reference
interchangeable
3820-000A551Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy J17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J17?
J17 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace J17?
There are 34 known substitutes for J17: 27015, 6305ZZ, 8700P1 and 31 more. Substitute compatibility should be verified for your specific system.
Is J17 still available?
J17 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026