1883-0012-06 — 1883-0012-06

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

1883-0012-06: 1883-0012-06.

The 1883-0012-06 is a the manufacturer industrial component. Key specifications include shape: QUADRANT, material: COPPER ALLOY, usage_design: INTENED FOR ELECTRICAL BONDING OF RACK MOUNTED ELECTRONIC EQUIPMENT PER MIL-B-5087, overall_height: 0.302 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, overall_length: 1.150 INCHES NOMINAL IN, overall_thickness: 1.150 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5999-01-600-4873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 1883-0012-06

NSN: 5999-01-600-4873
FSC: 5999 — Miscellaneous Electrical and Electronic Components
CAGE: 30817 — LAIRD TECHNOLOGIES, INC DBA LAIRD TECHNOLOGIES (USA)

SPECIFICATIONS

shape	QUADRANT
material	COPPER ALLOY
usage_design	INTENED FOR ELECTRICAL BONDING OF RACK MOUNTED ELECTRONIC EQUIPMENT PER MIL-B-5087
overall_height	0.302 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
overall_length	1.150 INCHES NOMINAL IN
overall_thickness	1.150 INCHES NOMINAL IN
surface_treatment	TIN
end_item_identification	B-2 TSSP
part_name_assigned_by_controlling_agency	WASHER,CORNER,GROUNDING,ELECTRICAL
NSN	5999-01-600-4873

COMPONENT DIAGRAM

KEY FEATURES

•

OVERALL THICKNESS: 1.150 INCHES NOMINAL IN

•

SHAPE: QUADRANT

•

SURFACE TREATMENT: TIN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.302 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
OVERALL THICKNESS	1.150 INCHES NOMINAL IN
SHAPE	QUADRANT
OVERALL LENGTH	1.150 INCHES NOMINAL IN
SPECIAL FEATURES	ITEM IS 1/4 OF A CIRCLE; IT HAS 1 HOLE 0.38 MIN DIA; CENTER OF HOLE IS LOCATED 0.40 FROM THE BOTTOM AND SIDE STRAIGHT EDGE; RADIUS OF CIRCULAR SIDE IS .75 FROM THE CENTER OF THE HOLE. EVERY 30 DEG ALONG THE CIRCULAR EDGE THERE IS A SMALL PIE SLICE CUTOUT; THE 90 DEG CORNER IS CUT AT A 45 DEG ANGLE 0.125 LONG; MATL(ASTMB194) IS 0.012 THICK AND IS BENT UP ON THE CIRCULAR EDGE 0.380 DOWN FROM THE EDGE SO THAT BENT EDGE IS 0.312 ABOVE THE NONBENT EDGE; PLATING IS PER MIL-T-10727 TYPE 1 0.0003 TO 0.0005 THICK
SURFACE TREATMENT	TIN
PART NAME ASSIGNED BY CONTROLLING AGENCY	WASHER,CORNER,GROUNDING,ELECTRICAL
END ITEM IDENTIFICATION	B-2 TSSP
MATERIAL	COPPER ALLOY
USAGE DESIGN	INTENED FOR ELECTRICAL BONDING OF RACK MOUNTED ELECTRONIC EQUIPMENT PER MIL-B-5087

OTHER ITEMS IN FSC 5999 — Miscellaneous Electrical and Electronic Components

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5999-00-001-1345 5999-00-001-1346 5999-00-001-1348 5999-00-001-1349 5999-00-001-1355 5999-00-001-1623 5999-00-001-2537 5999-00-001-2539

SUBSTITUTES & CROSS-REFERENCES 1

09A075-6Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Demilitarization required — mutilation

Ready to buy 1883-0012-06?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1883-0012-06?

1883-0012-06 is a 1883-0012-06. It is classified as a MRO (MRO_GENERAL).

What parts can replace 1883-0012-06?

There is 1 known substitute for 1883-0012-06: 09A075-6. Substitute compatibility should be verified for your specific system.

What is the NSN for 1883-0012-06?

1883-0012-06 is cataloged in the U.S. Government catalog under NSN 5999-01-600-4873. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1883-0012-06 — 1883-0012-06

Request a Quote — 1883-0012-06