09A075-6: 09A075-6.
The 09A075-6 is a the manufacturer industrial component. Key specifications include shape: QUADRANT, material: COPPER ALLOY, usage_design: INTENED FOR ELECTRICAL BONDING OF RACK MOUNTED ELECTRONIC EQUIPMENT PER MIL-B-5087, overall_height: 0.302 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, overall_length: 1.150 INCHES NOMINAL IN, overall_thickness: 1.150 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5999-01-600-4873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| shape | QUADRANT |
| material | COPPER ALLOY |
| usage_design | INTENED FOR ELECTRICAL BONDING OF RACK MOUNTED ELECTRONIC EQUIPMENT PER MIL-B-5087 |
| overall_height | 0.302 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN |
| overall_length | 1.150 INCHES NOMINAL IN |
| overall_thickness | 1.150 INCHES NOMINAL IN |
| surface_treatment | TIN |
| end_item_identification | B-2 TSSP |
| part_name_assigned_by_controlling_agency | WASHER,CORNER,GROUNDING,ELECTRICAL |
| NSN | 5999-01-600-4873 |
| OVERALL HEIGHT | 0.302 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN |
| OVERALL THICKNESS | 1.150 INCHES NOMINAL IN |
| SHAPE | QUADRANT |
| OVERALL LENGTH | 1.150 INCHES NOMINAL IN |
| SPECIAL FEATURES | ITEM IS 1/4 OF A CIRCLE; IT HAS 1 HOLE 0.38 MIN DIA; CENTER OF HOLE IS LOCATED 0.40 FROM THE BOTTOM AND SIDE STRAIGHT EDGE; RADIUS OF CIRCULAR SIDE IS .75 FROM THE CENTER OF THE HOLE. EVERY 30 DEG ALONG THE CIRCULAR EDGE THERE IS A SMALL PIE SLICE CUTOUT; THE 90 DEG CORNER IS CUT AT A 45 DEG ANGLE 0.125 LONG; MATL(ASTMB194) IS 0.012 THICK AND IS BENT UP ON THE CIRCULAR EDGE 0.380 DOWN FROM THE EDGE SO THAT BENT EDGE IS 0.312 ABOVE THE NONBENT EDGE; PLATING IS PER MIL-T-10727 TYPE 1 0.0003 TO 0.0005 THICK |
| SURFACE TREATMENT | TIN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER,CORNER,GROUNDING,ELECTRICAL |
| END ITEM IDENTIFICATION | B-2 TSSP |
| MATERIAL | COPPER ALLOY |
| USAGE DESIGN | INTENED FOR ELECTRICAL BONDING OF RACK MOUNTED ELECTRONIC EQUIPMENT PER MIL-B-5087 |
No substitute or cross-reference records for this part.