Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW
The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, inclosure_type: UNINCLOSED, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-084-3250, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→187467
NSN:4720-00-084-3250 FSC:4720 CAGE:16662 — LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE (USA)
SPECIFICATIONS
seat_angle
37.0 DEGREES FIRST END
temp_rating
-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class
3B FIRST END
inclosure_type
UNINCLOSED
connection_type
THREADED INTERNAL TUBE FIRST END
inside_diameter
0.375 INCHES NOMINAL IN
mounting_method
PRINTED CIRCUIT
connection_style
SWIVEL NUT FLARE FIRST END
outside_diameter
0.781 INCHES NOMINAL IN
thread_direction
RIGHT-HAND FIRST END
operating_pressure
2250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure
9000.0 POUNDS PER SQUARE INCH LBS
NSN
4720-00-084-3250
COMPONENT DIAGRAM
KEY FEATURES
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
HYDROSTATIC TEST PRESSURE: 4500.0 POUNDS PER SQUARE INCH LBS
•
INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.562 INCHES FIRST END IN
•
OUTER COVERING ENVIRONMENTAL PROTECTION: COLD RESISTANT AND OIL RESISTANT AND OZONE RESISTANT
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
OUTSIDE DIAMETER: 0.781 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MEDIA FOR WHICH DESIGNED
FUEL/OIL, HYDROCARBON SINGLE RESPONSE
SEAT ANGLE
37.0 DEGREES FIRST END
HYDROSTATIC TEST PRESSURE
4500.0 POUNDS PER SQUARE INCH LBS
INSIDE DIAMETER
0.375 INCHES NOMINAL IN
NOMINAL THREAD SIZE
0.562 INCHES FIRST END IN
OUTER COVERING ENVIRONMENTAL PROTECTION
COLD RESISTANT AND OIL RESISTANT AND OZONE RESISTANT
TEMP RATING
-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
OUTSIDE DIAMETER
0.781 INCHES NOMINAL IN
MEASURING METHOD AND LENGTH
17.000 INCHES NOMINAL OVERALL IN
LAYER COMPOSITION AND LOCATION
2ND LAYER BRAIDED COTTON CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER BRAIDED STEEL WIRE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 187467?
187467 is a HOSE ASSEMBLY,NONMETALLIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 187467?
There are 7 known substitutes for 187467: 103339, P72, 187467 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 187467?
187467 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-084-3250. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.