PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P72
P72 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The TAPPET,ENGINE POPPET VALVE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.065 INCHES NOMINAL IN, hole_diameter: 0.281 INCHES NOMINAL IN, overall_depth: 27.000 INCHES NOMINAL IN, overall_width: 40.000 INCHES NOMINAL IN, current_rating: 29.0 AMPERES NOMINAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-010-3339, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P72
NSN: 5310-00-010-3339
FSC: 5310
CAGE: 076M6 — AMZ ALABAMA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.065 INCHES NOMINAL IN
hole_diameter0.281 INCHES NOMINAL IN
overall_depth27.000 INCHES NOMINAL IN
overall_width40.000 INCHES NOMINAL IN
current_rating29.0 AMPERES NOMINAL
overall_height33.000 INCHES NOMINAL IN
voltage_rating206.0 VOLTS NOMINAL AND 230.0 VOLTS MAXIMUM
furnished_itemsFUEL PUMP,REDUCTION DRIVE ASSEMBLY
overall_diameter0.625 INCHES NOMINAL IN
operating_frequency60.0 HERTZ NOMINAL
peripheral_shape_styleROUND
NSN5310-00-010-3339
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: P72 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
THICKNESS: 0.065 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.281 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OVERALL DIAMETER: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE SHAPE STYLEROUND
MATERIALSTEEL OVERALL
THICKNESS0.065 INCHES NOMINAL IN
HOLE DIAMETER0.281 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OVERALL DIAMETER0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
D7-EA06-06NJX06NJ-17Interchangeable
interchangeable cross-reference
interchangeable
87467Interchangeable
interchangeable cross-reference
interchangeable
0843250Interchangeable
interchangeable cross-reference
interchangeable
X228Interchangeable
interchangeable cross-reference
interchangeable
C304Interchangeable
interchangeable cross-reference
interchangeable
YP72S41-2PCC304Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy P72?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P72?
P72 is a TAPPET,ENGINE POPPET VALVE.
What parts can replace P72?
There are 21 known substitutes for P72: D7-EA06-06NJX06NJ-17, 87467, 0843250 and 18 more. Substitute compatibility should be verified for your specific system.
Is P72 still available?
P72 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P72

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026