PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1811839
1811839 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, height: 0.156 INCHES NOMINAL IN, length: 0.317 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN, material: STEEL COMP 1012 OR PLASTIC POLYHEXAMETHYLENE AMIDE, thread_class: 2A A, furnished_items: LOCKNUT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-056-5429, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1811839
NSN: 5340-00-056-5429
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
height0.156 INCHES NOMINAL IN
length0.317 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
materialSTEEL COMP 1012 OR PLASTIC POLYHEXAMETHYLENE AMIDE
thread_class2A A
furnished_itemsLOCKNUT
nominal_thread_size0.112 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
material_document_and_classificationAISI ASSN STD 1ST MATERIAL RESPONSE OR MIL-M-20693,COMP A,TYPE 1 MIL SPEC 2ND MATERIAL RESPONSE
NSN5340-00-056-5429
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1811839 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2A A
•
HEIGHT: 0.156 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
LENGTH: 0.317 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD 1ST MATERIAL RESPONSE OR MIL-M-20693,COMP A,TYPE 1 MIL SPEC 2ND MATERIAL RESPONSE
•
MATERIAL: STEEL COMP 1012 OR PLASTIC POLYHEXAMETHYLENE AMIDE
•
WIDTH: 0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
FURNISHED ITEMS: LOCKNUT
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2A A
HEIGHT0.156 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.112 INCHES IN
LENGTH0.317 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD 1ST MATERIAL RESPONSE OR MIL-M-20693,COMP A,TYPE 1 MIL SPEC 2ND MATERIAL RESPONSE
MATERIALSTEEL COMP 1012 OR PLASTIC POLYHEXAMETHYLENE AMIDE
WIDTH0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
FURNISHED ITEMSLOCKNUT
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
4824H3113742PC409074Interchangeable
interchangeable cross-reference
interchangeable
4824-3130101REVJPCALLInterchangeable
interchangeable cross-reference
interchangeable
409074Interchangeable
interchangeable cross-reference
interchangeable
8328424Interchangeable
interchangeable cross-reference
interchangeable
271166Interchangeable
interchangeable cross-reference
interchangeable
7367670Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1811839?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1811839?
1811839 is a CLAMP,SYNCHRO.
What parts can replace 1811839?
There are 26 known substitutes for 1811839: 4824H3113742PC409074, 4824-3130101REVJPCALL, 409074 and 23 more. Substitute compatibility should be verified for your specific system.
Is 1811839 still available?
1811839 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1811839

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026