PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8328424
8328424 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: EXTERNAL TOOTH, nut_height: 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), overall_height: 0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-696-5172, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8328424
NSN: 5310-00-696-5172
FSC: 5310
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleEXTERNAL TOOTH
nut_height0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
overall_height0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
width_across_flats0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
nominal_thread_size0.190 INCHES IN
washer_outside_diameter0.375 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
thread_quantity_per_inch24
NSN5310-00-696-5172
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 8328424 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
•
NUT STYLE: EXTERNAL TOOTH
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
THREAD QUANTITY PER INCH: 24
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH ACROSS FLATS0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
NUT STYLEEXTERNAL TOOTH
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD SIZE0.190 INCHES IN
THREAD QUANTITY PER INCH24
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIALSTEEL OVERALL
THREAD DIRECTIONRIGHT-HAND
NUT HEIGHT0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
OVERALL HEIGHT0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
409074Interchangeable
interchangeable cross-reference
interchangeable
993905-1Interchangeable
interchangeable cross-reference
interchangeable
215-013-0016Interchangeable
interchangeable cross-reference
interchangeable
805004Interchangeable
interchangeable cross-reference
interchangeable
2187613-1Interchangeable
interchangeable cross-reference
interchangeable
K1024Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8328424?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8328424?
8328424 is a NUT,PLAIN,ASSEMBLED WASHER.
What parts can replace 8328424?
There are 15 known substitutes for 8328424: 409074, 993905-1, 215-013-0016 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8328424?
8328424 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-696-5172. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8328424

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026