PartsTable / O-RING / 1793-144
1793-144
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 2.667 INCHES MINIMUM AND 2.719 INCHES MAXIMUM IN, center_hole_diameter: 2.477 INCHES MINIMUM AND 2.497 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-291-3083, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1793-144
NSN: 5331-00-291-3083 FSC: 5331 — O-RINGCAGE: 91265 — PARKER-HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR outside_diameter 2.667 INCHES MINIMUM AND 2.719 INCHES MAXIMUM IN center_hole_diameter 2.477 INCHES MINIMUM AND 2.497 INCHES MAXIMUM IN cross-sectional_height 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN NSN 5331-00-291-3083
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 1793-144
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER HOLE DIAMETER: 2.477 INCHES MINIMUM AND 2.497 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• OUTSIDE DIAMETER: 2.667 INCHES MINIMUM AND 2.719 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER 2.477 INCHES MINIMUM AND 2.497 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OUTSIDE DIAMETER 2.667 INCHES MINIMUM AND 2.719 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
616-3 Interchangeable interchangeable cross-reference
interchangeable
CGAS4645 Interchangeable interchangeable cross-reference
interchangeable
9802 Interchangeable interchangeable cross-reference
interchangeable
3483 Interchangeable interchangeable cross-reference
interchangeable
106450 Interchangeable interchangeable cross-reference
interchangeable
110 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 1793-144?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1793-144?
1793-144 is a O-RING.
What parts can replace 1793-144?
There are 32 known substitutes for 1793-144: 616-3, CGAS4645, 9802 and 29 more. Substitute compatibility should be verified for your specific system.
Is 1793-144 still available?
1793-144 is currently cancelled.
Request a Quote — 1793-144