PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1737AS17443-1
1737AS17443-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, overall_width: 6.250 INCHES NOMINAL IN, overall_length: 6.870 INCHES NOMINAL IN, hardness_rating: 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL, special_features: 2 NOTCHES ON EACH SIDE ALONG LENGTH 0.650 DEEP BY 0.620 WIDE, bolt_hole_quantity: 12. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-041-9670, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1737AS17443-1
NSN: 5330-01-041-9670
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
overall_width6.250 INCHES NOMINAL IN
overall_length6.870 INCHES NOMINAL IN
hardness_rating35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
special_features2 NOTCHES ON EACH SIDE ALONG LENGTH 0.650 DEEP BY 0.620 WIDE
bolt_hole_quantity12
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-R-6130 TY 2,GR A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-041-9670
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1737AS17443-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6130 TY 2,GR A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
HARDNESS RATING: 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
•
BOLT HOLE QUANTITY: 12
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH6.870 INCHES NOMINAL IN
SPECIAL FEATURES2 NOTCHES ON EACH SIDE ALONG LENGTH 0.650 DEEP BY 0.620 WIDE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6130 TY 2,GR A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
HARDNESS RATING35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
OVERALL WIDTH6.250 INCHES NOMINAL IN
BOLT HOLE QUANTITY12
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
00044Interchangeable
interchangeable cross-reference
interchangeable
17443Interchangeable
interchangeable cross-reference
interchangeable
6DR296FInterchangeable
interchangeable cross-reference
interchangeable
TA267FSHX29Interchangeable
interchangeable cross-reference
interchangeable
TA267FSHX18Interchangeable
interchangeable cross-reference
interchangeable
18017443Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1737AS17443-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1737AS17443-1?
1737AS17443-1 is a GASKET.
What parts can replace 1737AS17443-1?
There are 14 known substitutes for 1737AS17443-1: 00044, 17443, 6DR296F and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1737AS17443-1?
1737AS17443-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-041-9670. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1737AS17443-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026