PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6DR296F
6DR296F ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, outside_diameter: 2.627 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-403-4805, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6DR296F
NSN: 5330-00-403-4805
FSC: 5330
CAGE: 26840 — HALE PRODUCTS, INC. (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
outside_diameter2.627 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.623 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter1.750 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-403-4805
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6DR296F MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT B
•
ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
•
CASE STYLE: RECESSED
•
SURFACE TREATMENT: PLASTIC CASE
•
OUTSIDE DIAMETER: 2.627 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER1.750 INCHES NOMINAL IN
CASE STYLERECESSED
SURFACE TREATMENTPLASTIC CASE
OUTSIDE DIAMETER2.627 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
SEAL WIDTH0.298 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
TA267FSHX29Interchangeable
interchangeable cross-reference
interchangeable
TA267FSHX18Interchangeable
interchangeable cross-reference
interchangeable
17443Interchangeable
interchangeable cross-reference
interchangeable
18017443Interchangeable
interchangeable cross-reference
interchangeable
006466V043Interchangeable
interchangeable cross-reference
interchangeable
N9451Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6DR296F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6DR296F?
6DR296F is a SEAL,PLAIN ENCASED.
What parts can replace 6DR296F?
There are 14 known substitutes for 6DR296F: TA267FSHX29, TA267FSHX18, 17443 and 11 more. Substitute compatibility should be verified for your specific system.
Is 6DR296F still available?
6DR296F is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6DR296F

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026