PartsTable
Technical Data Sheet
Download PDF

172540 — SWITCH ASSEMBLY

✓ Government record, cited
Ricoh · MRO · MRO_GENERAL
PRODUCT OVERVIEW

172540: SWITCH ASSEMBLY.

Special attachment for the Caplio GX and GX8. Special filters (ø37mm) can also be attached to the adaptor. Key specifications include radius: 1.094 INCHES NOMINAL IN, material: STEEL, outside_diameter: 0.872 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN, style_designator: CONCAVE, material_thickness: 0.083 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-232-5723, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 172540
NSN: 5340-00-232-5723
NIINs: 002325723, 007669200
FSC: 5340 — Hardware, Commercial
CAGE: 31007 — NAVISTAR INTERNATIONAL CORPORATION DBA NAVISTAR (USA)
SPECIFICATIONS
radius1.094 INCHES NOMINAL IN
materialSTEEL
outside_diameter0.872 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN
style_designatorCONCAVE
material_thickness0.083 INCHES NOMINAL IN
NSN5340-00-232-5723
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 172540 MFR: Ricoh ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIUS: 1.094 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.872 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CONCAVE
•
MATERIAL THICKNESS: 0.083 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
RADIUS1.094 INCHES NOMINAL IN
OUTSIDE DIAMETER0.872 INCHES MINIMUM AND 0.878 INCHES MAXIMUM IN
STYLE DESIGNATORCONCAVE
MATERIAL THICKNESS0.083 INCHES NOMINAL IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 8
PW214Reference document
Same NSN cross-reference
Reference document — Secondary reference
50B17Reference document
Same NSN cross-reference
Reference document — Secondary reference
12F014Reference document
Same NSN cross-reference
Reference document — Secondary reference
SA10Reference document
Same NSN cross-reference
Reference document — Secondary reference
47563Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-P-20691Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 172540?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 172540?
172540 is a SWITCH ASSEMBLY manufactured by Ricoh. It is classified as a MRO (MRO_GENERAL).
What parts can replace 172540?
There are 8 known substitutes for 172540: PW214, 50B17, 12F014 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 172540?
172540 is cataloged in the U.S. Government catalog under NSN 5340-00-232-5723. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 172540