PartsTable
Technical Data Sheet
Download PDF

171712 — INVERTED NUT,TUBE COUPLING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

171712: INVERTED NUT,TUBE COUPLING.

The INVERTED NUT,TUBE COUPLING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X, thread_size: 13/16-16, overall_length: 0.650 INCHES NOMINAL IN, style_designator: INVERTED NUT, TUBE, COMPRESSION, thread_direction: RIGHT-HAND, seat_angle_in_deg: 45.0. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-640-9613, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
171712
NSN: 5331-00-640-9613
NIINs: 006409613, 009476793
FSC: 5331 — O-ring
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X
thread_size13/16-16
overall_length0.650 INCHES NOMINAL IN
style_designatorINVERTED NUT, TUBE, COMPRESSION
thread_directionRIGHT-HAND
seat_angle_in_deg45.0
surface_treatmentPASSIVATE
fabrication_methodBAR STOCK, MACHINED
width_across_flats0.868 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
thread_pitch_diameters+0.7687 TO 0.7714 INCHES IN
casehardening_indicatorNOT CASEHARDENED
smallest_inside_diameter0.530 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
NSN5331-00-640-9613
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 171712 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
214324Reference document
Same NSN cross-reference
Reference document — Secondary reference
AC3424Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
G557-2-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
1230B1Reference document
Same NSN cross-reference
Reference document — Secondary reference
53083E27Reference document
Same NSN cross-reference
Reference document — Secondary reference
501220Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 171712?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 171712?
171712 is a INVERTED NUT,TUBE COUPLING.
What parts can replace 171712?
There are 8 known substitutes for 171712: 214324, AC3424, G557-2-7 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 171712?
171712 is cataloged in the U.S. Government catalog under NSN 5331-00-640-9613. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 171712