PartsTable
Technical Data Sheet
Download PDF

1713-C — SHAFT,SHOULDERED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1713-C: SHAFT,SHOULDERED.

The SHAFT,SHOULDERED is a the manufacturer industrial component. Key specifications include material: STEEL, head_height: 0.781 INCHES NOMINAL IN, overall_height: 0.2812 INCHES NOMINAL IN, style_designator: STANDARD, surface_treatment: NICKEL, head_outside_diameter: 0.7968 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-816-3423, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1713-C
NSN: 5340-00-816-3423
NIINs: 008163423, 013265946
FSC: 5340 — Hardware, Commercial
CAGE: 72653 — GC/WALDOM INC (USA)
SPECIFICATIONS
materialSTEEL
head_height0.781 INCHES NOMINAL IN
overall_height0.2812 INCHES NOMINAL IN
prong_quantity8
style_designatorSTANDARD
surface_treatmentNICKEL
head_outside_diameter0.7968 INCHES NOMINAL IN
prong_outside_diameter0.6406 INCHES NOMINAL IN
hole_accommodation_diameter0.625 INCHES NOMINAL IN
material_accommodated_thickness0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
NSN5340-00-816-3423
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1713-C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.781 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STANDARD
•
PRONG OUTSIDE DIAMETER: 0.6406 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL
•
HEAD OUTSIDE DIAMETER: 0.7968 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.2812 INCHES NOMINAL IN
HEAD HEIGHT0.781 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER0.625 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
STYLE DESIGNATORSTANDARD
PRONG OUTSIDE DIAMETER0.6406 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL
HEAD OUTSIDE DIAMETER0.7968 INCHES NOMINAL IN
MATERIALSTEEL
PRONG QUANTITY8
SUBSTITUTES & CROSS-REFERENCES 5
7312Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
279M006P004Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
11-360-CSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2805541-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
50BU002Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1713-C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1713-C?
1713-C is a SHAFT,SHOULDERED.
What parts can replace 1713-C?
There are 5 known substitutes for 1713-C: 7312, 279M006P004, 11-360-C and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1713-C?
1713-C is cataloged in the U.S. Government catalog under NSN 5340-00-816-3423. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1713-C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.