PartsTable / COMPONENT / 11-360-C
11-360-C
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL, head_height: 0.781 INCHES NOMINAL IN, overall_height: 0.2812 INCHES NOMINAL IN, style_designator: STANDARD, surface_treatment: NICKEL, head_outside_diameter: 0.7968 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-816-3423, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
11-360-C
NSN: 5340-00-816-3423 FSC: 5340 CAGE: 72653 — GC/WALDOM INC (USA)
SPECIFICATIONS
material STEEL head_height 0.781 INCHES NOMINAL IN overall_height 0.2812 INCHES NOMINAL IN prong_quantity 8 style_designator STANDARD surface_treatment NICKEL head_outside_diameter 0.7968 INCHES NOMINAL IN prong_outside_diameter 0.6406 INCHES NOMINAL IN hole_accommodation_diameter 0.625 INCHES NOMINAL IN material_accommodated_thickness 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN NSN 5340-00-816-3423
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 11-360-C
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HEAD OUTSIDE DIAMETER: 0.7968 INCHES NOMINAL IN
• STYLE DESIGNATOR: STANDARD
• HOLE ACCOMMODATION DIAMETER: 0.625 INCHES NOMINAL IN
• PRONG OUTSIDE DIAMETER: 0.6406 INCHES NOMINAL IN
• MATERIAL ACCOMMODATED THICKNESS: 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD OUTSIDE DIAMETER 0.7968 INCHES NOMINAL IN STYLE DESIGNATOR STANDARD HOLE ACCOMMODATION DIAMETER 0.625 INCHES NOMINAL IN PRONG QUANTITY 8 PRONG OUTSIDE DIAMETER 0.6406 INCHES NOMINAL IN OVERALL HEIGHT 0.2812 INCHES NOMINAL IN MATERIAL STEEL MATERIAL ACCOMMODATED THICKNESS 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN SURFACE TREATMENT NICKEL HEAD HEIGHT 0.781 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
7312 Upgraded Successor successor cross-reference
successor
DS-936415 Upgraded Successor successor cross-reference
successor
42315 Interchangeable interchangeable cross-reference
interchangeable
16T13 Interchangeable interchangeable cross-reference
interchangeable
50037 Interchangeable interchangeable cross-reference
interchangeable
700290 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 11-360-C?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11-360-C?
11-360-C is a BUTTON,PLUG.
What parts can replace 11-360-C?
There are 21 known substitutes for 11-360-C: 7312, DS-936415, 42315 and 18 more. Substitute compatibility should be verified for your specific system.
Is 11-360-C still available?
11-360-C is currently cancelled.
Request a Quote — 11-360-C