PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 16IN
16IN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FUSE LINK,ELECTRICAL is a the manufacturer industrial component. Key specifications include phase: THREE, design_type: SCREW, rated_swing: 16.000 INCHES NOMINAL IN, current_type: AC, mounting_type: FLOOR, performance_type: STANDARD DUTY. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-179-0050, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16IN
NSN: 5330-00-179-0050
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
phaseTHREE
design_typeSCREW
rated_swing16.000 INCHES NOMINAL IN
current_typeAC
mounting_typeFLOOR
performance_typeSTANDARD DUTY
voltage_in_volts220.0 AND 440.0
carriage_quantity1
frequency_in_hertz60.0
headstock_drive_typeGEARED HEAD
actual_swing_over_bed18.000 INCHES MINIMUM IN
thread_quantity_range+2.0 TO 72.0 PER INCH
NSN5330-00-179-0050
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 16IN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 35.000 INCHES MINIMUM AND 41.000 INCHES MAXIMUM IN
•
SURFACE CONDITION: SMOOTH BOTH SIDES
•
NONDEFINITIVE SPEC/STD DATA: 2 CLASS OR 4 CLASS
•
STRENGTHENING FEATURE: INSERT
•
MINIMUM TENSILE STRENGTH: ERR-060
•
THICKNESS: 0.046 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH35.000 INCHES MINIMUM AND 41.000 INCHES MAXIMUM IN
SURFACE CONDITIONSMOOTH BOTH SIDES
NONDEFINITIVE SPEC/STD DATA2 CLASS OR 4 CLASS
STRENGTHENING FEATUREINSERT
MINIMUM TENSILE STRENGTHERR-060
WIDTH35.000 INCHES MINIMUM AND 41.000 INCHES MAXIMUM IN
THICKNESS0.046 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
THICKNESS0.046 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
SURFACE CONDITIONSMOOTH BOTH SIDES
ENVIRONMENTAL PROTECTIONWATER RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
HHP151-3-32INInterchangeable
interchangeable cross-reference
interchangeable
HHP151CLASS2-30R4Interchangeable
interchangeable cross-reference
interchangeable
32INInterchangeable
interchangeable cross-reference
interchangeable
3416-2111-8030Interchangeable
interchangeable cross-reference
interchangeable
16INInterchangeable
interchangeable cross-reference
interchangeable
60Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16IN?
16IN is a FUSE LINK,ELECTRICAL.
What parts can replace 16IN?
There are 17 known substitutes for 16IN: HHP151-3-32IN, HHP151CLASS2-30R4, 32IN and 14 more. Substitute compatibility should be verified for your specific system.
Is 16IN still available?
16IN is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026