PartsTable
Technical Data Sheet
PartsTable / COMPONENT / HHP151-3-32IN
HHP151-3-32IN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RUBBER SHEET,SOLID,CLOTH INSERT. Key specifications include width: 36.000 INCHES NOMINAL IN, material: COTTON STRENGTHENING FEATURE, thickness: 0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN, strengthening_feature: INSERT, environmental_protection: WATER RESISTANT, minimum_tensile_strength: ERR-060. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-179-0051, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
HHP151-3-32IN
NSN: 5330-00-179-0051
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width36.000 INCHES NOMINAL IN
materialCOTTON STRENGTHENING FEATURE
thickness0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
insert_quantity1
strengthening_featureINSERT
environmental_protectionWATER RESISTANT
minimum_tensile_strengthERR-060
nondefinitive_spec/std_data4 CLASS
material_document_and_classificationHH-P-151 CL 4 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
NSN5330-00-179-0051
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: HHP151-3-32IN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 36.000 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: ERR-060
•
THICKNESS: 0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 4 CLASS
•
INSERT QUANTITY: 1
•
ENVIRONMENTAL PROTECTION: WATER RESISTANT
•
STRENGTHENING FEATURE: INSERT
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH36.000 INCHES NOMINAL IN
WIDTH36.000 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTHERR-060
THICKNESS0.078 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA4 CLASS
INSERT QUANTITY1
ENVIRONMENTAL PROTECTIONWATER RESISTANT
STRENGTHENING FEATUREINSERT
INSERT QUANTITY1
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-151 CL 4 FED SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
MIL-HHP151-1-16Interchangeable
interchangeable cross-reference
interchangeable
CW2300KPC628Interchangeable
interchangeable cross-reference
interchangeable
EV2740RUBGSKTInterchangeable
interchangeable cross-reference
interchangeable
HHP151CLASS2-30R4Interchangeable
interchangeable cross-reference
interchangeable
001790050Interchangeable
interchangeable cross-reference
interchangeable
32INInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy HHP151-3-32IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HHP151-3-32IN?
HHP151-3-32IN is a RUBBER SHEET,SOLID,CLOTH INSERT.
What parts can replace HHP151-3-32IN?
There are 7 known substitutes for HHP151-3-32IN: MIL-HHP151-1-16, CW2300KPC628, EV2740RUBGSKT and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for HHP151-3-32IN?
HHP151-3-32IN is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-179-0051. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — HHP151-3-32IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026