PartsTable
Technical Data Sheet
PartsTable / O-RING / 1672-16
1672-16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SLEEVE,CABLE LOCK is a the manufacturer cable assembly designed for reliable internal or external connectivity in enterprise server and storage environments. Key specifications include material: RUBBER, center_hole_diameter: 1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN, cross-sectional_height: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-040-9815, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1672-16
NSN: 5331-00-040-9815
FSC: 5331 — O-RING
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialRUBBER
center_hole_diameter1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
cross-sectional_height0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
NSN5331-00-040-9815
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1672-16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
•
CENTER HOLE DIAMETER: 1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
MATERIALRUBBER
CENTER HOLE DIAMETER1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
2-216 N304-75Interchangeable
interchangeable cross-reference
interchangeable
W 4072 485 ALInterchangeable
interchangeable cross-reference
interchangeable
1717-216Interchangeable
interchangeable cross-reference
interchangeable
1672-16Interchangeable
interchangeable cross-reference
interchangeable
1672B16Interchangeable
interchangeable cross-reference
interchangeable
237-6016Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1672-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1672-16?
1672-16 is a SLEEVE,CABLE LOCK.
What parts can replace 1672-16?
There are 8 known substitutes for 1672-16: 2-216 N304-75, W 4072 485 AL, 1717-216 and 5 more. Substitute compatibility should be verified for your specific system.
Is 1672-16 still available?
1672-16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1672-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026