PartsTable
Technical Data Sheet
PartsTable / O-RING / 105X16L
105X16L ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.367 INCHES MINIMUM AND 1.407 INCHES MAXIMUM IN, center_hole_diameter: 1.103 INCHES MINIMUM AND 1.115 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, end_item_identification: NSN 2320-01-304-2277 PLS (PALLETIZED LOADING SYSTEM). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-040-9815, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
105X16L
NSN: 5331-00-040-9815
FSC: 5331 — O-RING
CAGE: K8499 — PARKER HANNIFIN (UK) LIMITED, (GBR)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.367 INCHES MINIMUM AND 1.407 INCHES MAXIMUM IN
center_hole_diameter1.103 INCHES MINIMUM AND 1.115 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationNSN 2320-01-304-2277 PLS (PALLETIZED LOADING SYSTEM)
NSN5331-00-040-9815
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 105X16L MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
•
CENTER HOLE DIAMETER: 1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
MATERIALRUBBER
CENTER HOLE DIAMETER1.161 INCHES MINIMUM AND 1.181 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
2-216 N304-75Interchangeable
interchangeable cross-reference
interchangeable
W 4072 485 ALInterchangeable
interchangeable cross-reference
interchangeable
1717-216Interchangeable
interchangeable cross-reference
interchangeable
1672-16Interchangeable
interchangeable cross-reference
interchangeable
1672B16Interchangeable
interchangeable cross-reference
interchangeable
237-6016Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 105X16L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 105X16L?
105X16L is a O-RING.
What parts can replace 105X16L?
There are 7 known substitutes for 105X16L: 2-216 N304-75, W 4072 485 AL, 1717-216 and 4 more. Substitute compatibility should be verified for your specific system.
Is 105X16L still available?
105X16L is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 105X16L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026