PartsTable
Technical Data Sheet
PartsTable / CIRCUIT CARD ASSEMBLY / 1670-3
1670-3 ✓ Verified by PartsTable
Legrand · CABLE ASSEMBLY
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

Power adaptor, InLIne®, to ru US devices in the European market. Caution, in this adaptor is no power reduction, please make shure your US device is ready for use in 230 Volt areas. Key specifications include color: BLACK OVERALL, material: RUBBER SYNTHETIC OVERALL, body_width: 1.781 INCHES NOMINAL IN, cone_width: 0.8820 INCHES NOMINAL IN, body_height: 2.562 INCHES NOMINAL IN, body_length: 2.031 INCHES NOMINAL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-307-9978, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1670-3
NSN: 5998-00-307-9978
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 02227 — NAVAL ELECTRONIC SYSTEMS SECURITY ENGINEERING CENTER (USA)
SPECIFICATIONS
colorBLACK OVERALL
materialRUBBER SYNTHETIC OVERALL
body_width1.781 INCHES NOMINAL IN
cone_width0.8820 INCHES NOMINAL IN
body_height2.562 INCHES NOMINAL IN
body_length2.031 INCHES NOMINAL IN
groove_width0.046 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
bore_diameter1.6250 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
inclosure_typeFULLY INCLOSED
overall_height0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
NSN5998-00-307-9978
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 1670-3 MFR Legrand CONE AND ROLLERS,TAPERED ROLLER
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONTSEC/KG-40 (PARALLEL), GENERATOR, ELECTRONIC KEY
END ITEM IDENTIFICATIONTSEC/KG-40 (PARALLEL), GENERATOR, ELECTRONIC KEY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
K336Interchangeable
interchangeable cross-reference
interchangeable
211093Interchangeable
interchangeable cross-reference
interchangeable
100267Interchangeable
interchangeable cross-reference
interchangeable
40586000269Interchangeable
interchangeable cross-reference
interchangeable
Z-126Interchangeable
interchangeable cross-reference
interchangeable
1114GInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 1670-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1670-3?
1670-3 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Legrand.
What parts can replace 1670-3?
There are 10 known substitutes for 1670-3: K336, 211093, 100267 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1670-3?
1670-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-00-307-9978. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1670-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026