PartsTable
Technical Data Sheet
PartsTable / O-RING / 16482-10
16482-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 0.412 INCHES MINIMUM AND 0.432 INCHES MAXIMUM IN, cross-sectional_height: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-914-5320, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16482-10
NSN: 5331-00-914-5320
FSC: 5331 — O-RING
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter0.412 INCHES MINIMUM AND 0.432 INCHES MAXIMUM IN
cross-sectional_height0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
NSN5331-00-914-5320
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 16482-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
CENTER HOLE DIAMETER: 0.412 INCHES MINIMUM AND 0.432 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
CENTER HOLE DIAMETER0.412 INCHES MINIMUM AND 0.432 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
19760Interchangeable
interchangeable cross-reference
interchangeable
2622Interchangeable
interchangeable cross-reference
interchangeable
161710Interchangeable
interchangeable cross-reference
interchangeable
164-82Interchangeable
interchangeable cross-reference
interchangeable
16482ADXInterchangeable
interchangeable cross-reference
interchangeable
5305PL0759428Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16482-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16482-10?
16482-10 is a O-RING.
What parts can replace 16482-10?
There are 10 known substitutes for 16482-10: 19760, 2622, 161710 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16482-10?
16482-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-914-5320. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16482-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026