PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 161710
161710 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, outside_diameter: 2.627 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.623 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-097-3126, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
161710
NSN: 5330-00-097-3126
FSC: 5330
CAGE: 83299 — HYSTER-YALE GROUP, INC. DBA YALE MATERIALS HANDLING (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
outside_diameter2.627 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.623 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter2.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-097-3126
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 161710 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
CASE STYLE: SQUARE
•
HOUSING BORE DIAMETER: 2.623 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: STEEL CASE
•
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEAL WIDTH0.500 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
CASE STYLESQUARE
HOUSING BORE DIAMETER2.623 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
OUTSIDE DIAMETER2.627 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
1402-2-1Interchangeable
interchangeable cross-reference
interchangeable
BACT42C22-1Interchangeable
interchangeable cross-reference
interchangeable
200-1402-33-01-0Interchangeable
interchangeable cross-reference
interchangeable
2622Interchangeable
interchangeable cross-reference
interchangeable
520904Interchangeable
interchangeable cross-reference
interchangeable
SXX1360Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 161710?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 161710?
161710 is a SEAL,PLAIN ENCASED.
What parts can replace 161710?
There are 17 known substitutes for 161710: 1402-2-1, BACT42C22-1, 200-1402-33-01-0 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 161710?
161710 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-097-3126. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 161710

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026