PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 163094-060
163094-060 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 0.905 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN, aperture_diameter: 0.625 INCHES NOMINAL IN, cross-sectional_thickness: 0.047 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-865-1997, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
163094-060
NSN: 5330-00-865-1997
FSC: 5330
CAGE: 62353 — U S PARA PLATE CORP DIV HI GEAR BALL VALVES (USA)
SPECIFICATIONS
outside_diameter0.905 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN
aperture_diameter0.625 INCHES NOMINAL IN
cross-sectional_thickness0.047 INCHES NOMINAL IN
NSN5330-00-865-1997
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 163094-060 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.905 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 0.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.047 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.905 INCHES MINIMUM AND 0.910 INCHES MAXIMUM IN
APERTURE DIAMETER0.625 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.047 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
P114Interchangeable
interchangeable cross-reference
interchangeable
CP312Interchangeable
interchangeable cross-reference
interchangeable
B4TZ8501AInterchangeable
interchangeable cross-reference
interchangeable
8-114Interchangeable
interchangeable cross-reference
interchangeable
7500526Interchangeable
interchangeable cross-reference
interchangeable
S814-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 163094-060?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 163094-060?
163094-060 is a GASKET.
What parts can replace 163094-060?
There are 17 known substitutes for 163094-060: P114, CP312, B4TZ8501A and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 163094-060?
163094-060 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-865-1997. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 163094-060

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026