PartsTable
Technical Data Sheet
PartsTable / COMPONENT / P114
P114 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PISTON,INTERNAL COMBUSTION ENGIN. Key specifications include material: STEEL, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, overall_length: 2.500 INCHES NOMINAL IN, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM OVERALL, inside_diameter: 1.250 INCHES NOMINAL IN, special_features: 0.052 INCH IN DIAMETER; 2.5 INCHES LONG; 11 THREADS PER INCH IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-182-6818, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
P114
NSN: 5330-00-182-6818
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
overall_length2.500 INCHES NOMINAL IN
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM OVERALL
inside_diameter1.250 INCHES NOMINAL IN
special_features0.052 INCH IN DIAMETER; 2.5 INCHES LONG; 11 THREADS PER INCH IN
thread_directionRIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
basic_shape_styleSOLID
fabrication_methodHOT ROLLED
minimum_yield_strength36000 POUNDS PER SQUARE INCH LBS
end_item_identificationPUMP, CENTRIFUGAL
minimum_tensile_strength58000 POUNDS PER SQUARE INCH LBS
NSN5330-00-182-6818
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: P114 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 71.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-5516,CL B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
P114Interchangeable
interchangeable cross-reference
interchangeable
CP312Interchangeable
interchangeable cross-reference
interchangeable
B4TZ8501AInterchangeable
interchangeable cross-reference
interchangeable
07-852060Interchangeable
interchangeable cross-reference
interchangeable
0S20486Interchangeable
interchangeable cross-reference
interchangeable
852060Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy P114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is P114?
P114 is a PISTON,INTERNAL COMBUSTION ENGIN.
What parts can replace P114?
There are 17 known substitutes for P114: P114, CP312, B4TZ8501A and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for P114?
P114 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-182-6818. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — P114

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026