PartsTable
Technical Data Sheet
Download PDF

161347 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

161347: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1045 OVERALL, first_end_style: CHAMFERED, pin_overall_length: 5.000 INCHES NOMINAL IN, first_hole_diameter: 0.125 INCHES NOMINAL IN, pin_overall_diameter: 0.8740 INCHES NOMINAL IN, second_hole_diameter: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-291-9914, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
161347
NSN: 5310-00-291-9914
NIINs: 002919914, 005272183, 007719104
FSC: 5310 — Nuts and Washers
CAGE: 57712 — TELEMECHANICS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1045 OVERALL
first_end_styleCHAMFERED
special_featuresBOTH ENDS DRILLED 0.3438 IN. DIA,0.875 IN. DEEP AND TAPPED 1/8 IN. NPT,CENTER CUT,0.6404 IN. RADIUS,BOTTOMING 0.6094 IN. FROM OPPOSITI SIDE IN
pin_overall_length5.000 INCHES NOMINAL IN
first_hole_diameter0.125 INCHES NOMINAL IN
pin_overall_diameter0.8740 INCHES NOMINAL IN
second_hole_diameter0.125 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.062 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5310-00-291-9914
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 161347 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: WOOL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.219 INCHES NOMINAL IN
•
THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.375 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALWOOL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.219 INCHES NOMINAL IN
THICKNESS0.062 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 4
N17T350013-794Reference document
Same NSN cross-reference
Reference document — Secondary reference
C-F-206FReference document
Same NSN cross-reference
Reference document — Identification reference
5310PL1446999Reference document
Same NSN cross-reference
Reference document — Informative reference only
5310PL1244059Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 161347?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 161347?
161347 is a WASHER,FLAT.
What parts can replace 161347?
There are 4 known substitutes for 161347: N17T350013-794, C-F-206F, 5310PL1446999 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 161347?
161347 is cataloged in the U.S. Government catalog under NSN 5310-00-291-9914. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 161347