PartsTable
Technical Data Sheet
Download PDF

C-F-206F — WASHER,FLAT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

C-F-206F: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include length: 10.500 INCHES NOMINAL IN, material: WOOL COMP 16R1 OVERALL, thickness: 0.188 INCHES NOMINAL IN, joint_type: BUTT OVERALL, hole_diameter: 1.750 INCHES NOMINAL IN, outside_diameter: 1.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-076-0077, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
C-F-206F
NSN: 5330-00-076-0077
NIINs: 000760077, 002901406, 002919914, 005279036, 005853132, 006412840, 008417419
FSC: 5330 — Packing and Gasket Materials
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
length10.500 INCHES NOMINAL IN
materialWOOL COMP 16R1 OVERALL
thickness0.188 INCHES NOMINAL IN
joint_typeBUTT OVERALL
hole_diameter1.750 INCHES NOMINAL IN
outside_diameter1.250 INCHES NOMINAL IN
overall_diameter2.375 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.750 INCHES NOMINAL IN
fabrication_methodSOLID
lubrication_methodCOATED AND IMPREGNATED
cross-sectional_width0.250 INCHES NOMINAL IN
NSN5330-00-076-0077
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: C-F-206F MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
LUBRICATION METHOD: COATED AND IMPREGNATED
•
CROSS-SECTIONAL WIDTH: 0.859 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: C-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
OUTSIDE DIAMETER: 0.859 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.578 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
LUBRICATION METHODCOATED AND IMPREGNATED
CROSS-SECTIONAL WIDTH0.859 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONC-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
OUTSIDE DIAMETER0.859 INCHES NOMINAL IN
APERTURE DIAMETER0.578 INCHES NOMINAL IN
MATERIALWOOL COMP 16R1 OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
8626387Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy C-F-206F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is C-F-206F?
C-F-206F is a WASHER,FLAT.
What parts can replace C-F-206F?
There is 1 known substitute for C-F-206F: 8626387. Substitute compatibility should be verified for your specific system.
What is the NSN for C-F-206F?
C-F-206F is cataloged in the U.S. Government catalog under NSN 5330-00-076-0077. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — C-F-206F