PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 16028P11
16028P11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, overall_width: 1.375 INCHES NOMINAL IN, style_designator: TWO PIECE, material_thickness: 0.375 INCHES NOMINAL IN, loop_inside_diameter: 4.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-044-2410, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
16028P11
NSN: 5340-00-044-2410
FSC: 5340
CAGE: 27618 — TAYLOR MACHINE WORKS INC (USA)
SPECIFICATIONS
materialSTEEL BAND
overall_width1.375 INCHES NOMINAL IN
style_designatorTWO PIECE
material_thickness0.375 INCHES NOMINAL IN
loop_inside_diameter4.125 INCHES NOMINAL IN
NSN5340-00-044-2410
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 16028P11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: TWO PIECE
•
LOOP INSIDE DIAMETER: 4.125 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.375 INCHES NOMINAL IN
STYLE DESIGNATORTWO PIECE
LOOP INSIDE DIAMETER4.125 INCHES NOMINAL IN
OVERALL WIDTH1.375 INCHES NOMINAL IN
MATERIALSTEEL BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
115-10-4Upgraded Successor
successor cross-reference
successor
4CUpgraded Successor
successor cross-reference
successor
2781-4Interchangeable
interchangeable cross-reference
interchangeable
RH19B25Interchangeable
interchangeable cross-reference
interchangeable
Y15084Interchangeable
interchangeable cross-reference
interchangeable
406Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16028P11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16028P11?
16028P11 is a CLAMP,LOOP.
What parts can replace 16028P11?
There are 22 known substitutes for 16028P11: 115-10-4, 4C, 2781-4 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16028P11?
16028P11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-044-2410. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16028P11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026