PartsTable
Technical Data Sheet
Download PDF

157775 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

157775: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, overall_width: 0.500 INCHES NOMINAL IN, overall_height: 0.560 INCHES NOMINAL IN, overall_length: 3.310 INCHES NOMINAL IN, special_features: TWO ADDITIONAL HOLES, 4-40 UNC 2B BY 0.180 IN. MIN DEEP IN, surface_treatment: CHROMATE.

This part is cataloged in the U.S. Government catalog under NSN 5331-00-585-3558, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
157775
NSN: 5331-00-585-3558
NIINs: 005853558, 013796090
FSC: 5331 — O-ring
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
overall_width0.500 INCHES NOMINAL IN
overall_height0.560 INCHES NOMINAL IN
overall_length3.310 INCHES NOMINAL IN
special_featuresTWO ADDITIONAL HOLES, 4-40 UNC 2B BY 0.180 IN. MIN DEEP IN
surface_treatmentCHROMATE
mounting_hole_typePLAIN
mounting_hole_diameter0.125 INCHES NOMINAL IN
mounting_hole_quantity4
material_document_and_classificationQQ-A-250/6 T351 FED SPEC SINGLE MATERIAL RESPONSE
surface_treatment_document_and_classificationMIL-C-5541 CL 1A MIL SPEC SINGLE TREATMENT RESPONSE A
NSN5331-00-585-3558
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 157775 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 7
SP3501Reference document
Same NSN cross-reference
Reference document — Secondary reference
151117Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-13PS130-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
200-0839-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
395829Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1JA3368H24Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 157775?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 157775?
157775 is a BRACKET,MOUNTING.
What parts can replace 157775?
There are 7 known substitutes for 157775: SP3501, 151117, 2-13PS130-5 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 157775?
157775 is cataloged in the U.S. Government catalog under NSN 5331-00-585-3558. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 157775