PartsTable
Technical Data Sheet
SP3501 ✓ Verified by PartsTable
· NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, body_style: STRAIGHT SHAPE, FIBER OPTIC, body_height: 10.0 MILLIMETERS NOMINAL MM, overall_width: 0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN, overall_height: 0.090 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN, overall_length: 53.0 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-237-9795, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP3501
NSN: 5315-00-237-9795
FSC: 5315
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
body_styleSTRAIGHT SHAPE, FIBER OPTIC
body_height10.0 MILLIMETERS NOMINAL MM
overall_width0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
overall_height0.090 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
overall_length53.0 MILLIMETERS NOMINAL MM
style_designatorPLAIN
terminal_locationFRONT SINGLE MATING END SINGLE CONTACT GROUPING
mating_end_quantity1
starting_edge_shapeSTRAIGHT
center_hole_diameter0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5315-00-237-9795
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: SP3501 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
STARTING EDGE SHAPE: STRAIGHT
MATERIAL: COPPER ALLOY OVERALL
STYLE DESIGNATOR: PLAIN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.090 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
OVERALL WIDTH0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
OVERALL LENGTH0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
STARTING EDGE SHAPESTRAIGHT
MATERIALCOPPER ALLOY OVERALL
STYLE DESIGNATORPLAIN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
575-2200-1569889REVAPC10Interchangeable
interchangeable cross-reference
interchangeable
5048B3REVAPC3Interchangeable
interchangeable cross-reference
interchangeable
SP3501Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy SP3501?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP3501?
SP3501 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace SP3501?
There are 3 known substitutes for SP3501: 575-2200-1569889REVAPC10, 5048B3REVAPC3, SP3501. Substitute compatibility should be verified for your specific system.
What is the NSN for SP3501?
SP3501 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-237-9795. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP3501