PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 156115H0070D000

156115H0070D000 — Technical Data Sheet

✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES FIRST END, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 4720-01-261-1941, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
156115H0070D000
NSN: 4720-01-261-1941
FSC: 4720
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)
SPECIFICATIONS
flow_angle90.0 DEGREES FIRST END
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter1.125 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
thread_directionRIGHT-HAND FIRST END
features_providedREUSABLE END FITTINGS
operating_pressure750.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure3000.0 POUNDS PER SQUARE INCH LBS
NSN4720-01-261-1941
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 156115H0070D000 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: REUSABLE END FITTINGS
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG: 0.0
•
MINIMUM INSIDE BENDING RADIUS: 5.500 INCHES IN
•
THREAD QUANTITY PER INCH: 12 FIRST END
•
INSIDE DIAMETER: 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
TECHNICAL CHARACTERISTICS
FEATURES PROVIDEDREUSABLE END FITTINGS
CONNECTION STYLESWIVEL NUT FLARE FIRST END
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG0.0
MINIMUM INSIDE BENDING RADIUS5.500 INCHES IN
THREAD QUANTITY PER INCH12 FIRST END
INSIDE DIAMETER0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
THREAD DIRECTIONRIGHT-HAND FIRST END
OUTSIDE DIAMETER1.125 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
MIL-DTL-83796/1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
M83796/1N0204AInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AE1000881N0204InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
S850D0220DInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
156001-6D-0220InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AE1006703G0220InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 156115H0070D000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 156115H0070D000?
156115H0070D000 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 156115H0070D000?
There are 28 known substitutes for 156115H0070D000: MIL-DTL-83796/1, M83796/1N0204A, AE1000881N0204 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 156115H0070D000?
156115H0070D000 is cataloged in the Federal Logistics Information System under NSN 4720-01-261-1941. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 156115H0070D000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026