PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 156005-4S-0194A
156005-4S-0194A ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES SECOND END, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B SECOND END, connection_type: THREADED INTERNAL TUBE SECOND END, inside_diameter: 0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-264-3326, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
156005-4S-0194A
NSN: 4720-01-264-3326
FSC: 4720
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)
SPECIFICATIONS
flow_angle90.0 DEGREES SECOND END
seat_angle37.0 DEGREES SECOND END
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B SECOND END
connection_typeTHREADED INTERNAL TUBE SECOND END
inside_diameter0.204 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
connection_styleSWIVEL NUT FLARE SECOND END
outside_diameter0.438 INCHES MINIMUM AND 0.482 INCHES MAXIMUM IN
thread_directionRIGHT-HAND FIRST END
features_providedREUSABLE END FITTINGS
operating_pressure1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure6000.0 POUNDS PER SQUARE INCH LBS
NSN4720-01-264-3326
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 156005-4S-0194A · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: REUSABLE END FITTINGS
•
BURST TEST PRESSURE: 6000.0 POUNDS PER SQUARE INCH LBS
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
•
MINIMUM INSIDE BENDING RADIUS: 2.000 INCHES IN
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDREUSABLE END FITTINGS
BURST TEST PRESSURE6000.0 POUNDS PER SQUARE INCH LBS
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
END CONNECTION DESIGNSTRAIGHT FIRST END
END CONNECTION DESIGNELBOW SECOND END
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
MINIMUM INSIDE BENDING RADIUS2.000 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
CONNECTION STYLESWIVEL NUT FLARE SECOND END
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
MIL-DTL-83796/1Interchangeable
interchangeable cross-reference
interchangeable
M83796/1N0204AInterchangeable
interchangeable cross-reference
interchangeable
AE1000881N0204Interchangeable
interchangeable cross-reference
interchangeable
S850D0220DInterchangeable
interchangeable cross-reference
interchangeable
156001-6D-0220Interchangeable
interchangeable cross-reference
interchangeable
AE1006703G0220Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 156005-4S-0194A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 156005-4S-0194A?
156005-4S-0194A is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 156005-4S-0194A?
There are 26 known substitutes for 156005-4S-0194A: MIL-DTL-83796/1, M83796/1N0204A, AE1000881N0204 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 156005-4S-0194A?
156005-4S-0194A is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-264-3326. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 156005-4S-0194A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026