PartsTable / COMPONENT / 15250C
15250C
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include width: 0.437 INCHES NOMINAL IN, height: 0.390 INCHES NOMINAL IN, material: STEEL OVERALL, design_type: LOOP ENGAGING, hole_diameter: 0.144 INCHES NOMINAL IN, overall_width: 0.875 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5160, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
15250C
NSN: 5340-00-205-5160 FSC: 5340 CAGE: 14608 — EMHART INDUSTRIES INC CORBIN CABINET LOCK HARDWARE DIV (USA)
SPECIFICATIONS
width 0.437 INCHES NOMINAL IN height 0.390 INCHES NOMINAL IN material STEEL OVERALL design_type LOOP ENGAGING hole_diameter 0.144 INCHES NOMINAL IN hole_quantity 2 overall_width 0.875 INCHES NOMINAL IN overall_height 0.734 INCHES NOMINAL IN overall_length 1.625 INCHES NOMINAL IN operation_method LEVER HANDLE style_designator LEVER features_provided PADLOCK EYE NSN 5340-00-205-5160
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 15250C
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SURFACE HOLE DIAMETER: 0.144 INCHES NOMINAL IN
• OPERATION METHOD: LEVER HANDLE
• HEIGHT: 0.390 INCHES NOMINAL IN
• ENGAGING SURFACE WIDTH: 0.593 INCHES NOMINAL IN
• FEATURES PROVIDED: PADLOCK EYE
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOR LEVER SURFACE HOLE DIAMETER 0.144 INCHES NOMINAL IN OPERATION METHOD LEVER HANDLE HEIGHT 0.390 INCHES NOMINAL IN HOLE QUANTITY 2 ENGAGING SURFACE WIDTH 0.593 INCHES NOMINAL IN FEATURES PROVIDED PADLOCK EYE SURFACE HOLE QUANTITY 2 ENGAGING SURFACE THICKNESS 0.125 INCHES NOMINAL IN OVERALL LENGTH 1.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
227 Upgraded Successor successor cross-reference
successor
2-1-2SC Upgraded Successor successor cross-reference
successor
SC2-1-2 Upgraded Successor successor cross-reference
successor
05-0979 Upgraded Successor successor cross-reference
successor
2877827 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 15250C?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15250C?
15250C is a CATCH,CLAMPING.
What parts can replace 15250C?
There are 8 known substitutes for 15250C: 227, 2-1-2SC, SC2-1-2 and 5 more. Substitute compatibility should be verified for your specific system.
Is 15250C still available?
15250C is currently cancelled.