PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2877827

2877827 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include width: 0.437 INCHES NOMINAL IN, height: 0.390 INCHES NOMINAL IN, material: STEEL OVERALL, design_type: LOOP ENGAGING, hole_diameter: 0.144 INCHES NOMINAL IN, overall_width: 0.875 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5160, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2877827
NSN: 5340-00-205-5160
FSC: 5340
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
width0.437 INCHES NOMINAL IN
height0.390 INCHES NOMINAL IN
materialSTEEL OVERALL
design_typeLOOP ENGAGING
hole_diameter0.144 INCHES NOMINAL IN
hole_quantity2
overall_width0.875 INCHES NOMINAL IN
overall_height0.734 INCHES NOMINAL IN
overall_length1.625 INCHES NOMINAL IN
operation_methodLEVER HANDLE
style_designatorLEVER
features_providedPADLOCK EYE
NSN5340-00-205-5160
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2877827 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: LEVER
•
SURFACE HOLE DIAMETER: 0.144 INCHES NOMINAL IN
•
OPERATION METHOD: LEVER HANDLE
•
HEIGHT: 0.390 INCHES NOMINAL IN
•
HOLE QUANTITY: 2
•
ENGAGING SURFACE WIDTH: 0.593 INCHES NOMINAL IN
•
FEATURES PROVIDED: PADLOCK EYE
•
SURFACE HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORLEVER
SURFACE HOLE DIAMETER0.144 INCHES NOMINAL IN
OPERATION METHODLEVER HANDLE
HEIGHT0.390 INCHES NOMINAL IN
HOLE QUANTITY2
ENGAGING SURFACE WIDTH0.593 INCHES NOMINAL IN
FEATURES PROVIDEDPADLOCK EYE
SURFACE HOLE QUANTITY2
ENGAGING SURFACE THICKNESS0.125 INCHES NOMINAL IN
OVERALL LENGTH1.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
227Upgraded Successor
successor cross-reference
successor
2-1-2SCUpgraded Successor
successor cross-reference
successor
SC2-1-2Upgraded Successor
successor cross-reference
successor
30609038144130Upgraded Successor
successor cross-reference
successor
05-0979Upgraded Successor
successor cross-reference
successor
CVACLAT61Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2877827?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2877827?
2877827 is a CATCH,CLAMPING.
What parts can replace 2877827?
There are 8 known substitutes for 2877827: 227, 2-1-2SC, SC2-1-2 and 5 more. Substitute compatibility should be verified for your specific system.
Is 2877827 still available?
2877827 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2877827

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026