PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 148426
148426 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

PARTS KIT,ELECTRICAL ENGINE STAR. Key specifications include length: 110.000 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR, cross-sectional_width: 2.500 INCHES NOMINAL IN, cross-sectional_height: 0.060 INCHES NOMINAL IN, cross-sectional_shape_style: RECTANGULAR, nonmetallic_hardness_rating: 60.0 MINIMUM SHORE DUROMETER A AND 80.0 MAXIMUM SHORE DUROMETER A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-7944, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
148426
NSN: 3110-00-108-7944
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
length110.000 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR
cross-sectional_width2.500 INCHES NOMINAL IN
cross-sectional_height0.060 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR
nonmetallic_hardness_rating60.0 MINIMUM SHORE DUROMETER A AND 80.0 MAXIMUM SHORE DUROMETER A
NSN3110-00-108-7944
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 148426 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 0.6875 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 0.5000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
STYLE DESIGNATOR: NON-SEPARABLE, CLOSED END, DRAWN SHELL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER0.6875 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESEXTRA CAPACITY OUTER RACE
BORE DIAMETER0.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL WIDTH0.5000 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, CLOSED END, DRAWN SHELL
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
148426Interchangeable
interchangeable cross-reference
interchangeable
148493Interchangeable
interchangeable cross-reference
interchangeable
SL-700-7Interchangeable
interchangeable cross-reference
interchangeable
M881Interchangeable
interchangeable cross-reference
interchangeable
SL715-7Interchangeable
interchangeable cross-reference
interchangeable
173536Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 148426?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 148426?
148426 is a PARTS KIT,ELECTRICAL ENGINE STAR.
What parts can replace 148426?
There are 15 known substitutes for 148426: 148426, 148493, SL-700-7 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 148426?
148426 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-108-7944. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 148426

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026