PartsTable
Technical Data Sheet
Download PDF

21831 — CIRCUIT CARD ASSEMBLY

✓ Government record, cited
Lindy · NETWORK · 10GBE_NIC
PRODUCT OVERVIEW

21831: CIRCUIT CARD ASSEMBLY.

The CIRCUIT CARD ASSEMBLY is a Lindy industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_width: 0.5000 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, CLOSED END, DRAWN SHELL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-108-7944, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
NETWORK→ 10GBE_NIC→ 21831
NSN: 3110-00-108-7944
NIINs: 001087944, 009437985, 010742469
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 07429 — BLACK AND DECKER US INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.5000 INCHES NOMINAL IN
overall_width0.5000 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, CLOSED END, DRAWN SHELL
overall_outside_diameter0.6875 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-108-7944
COMPONENT DIAGRAM
NIC CTRL PHY 0 PHY 1 ROM VRM SFP+ SFP+ LINK ACT PCIe x8 ~167 mm NETWORK ADAPTER | 2-PORT 10GbE | SFP+ | Full Height PCIe x8 | Link/Activity LEDs | PXE boot ROM TITLE NIC ADAPTER PN 21831 MFR Lindy CIRCUIT CARD ASSEMBLY
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, CLOSED END, DRAWN SHELL
•
OVERALL OUTSIDE DIAMETER: 0.6875 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, CLOSED END, DRAWN SHELL
OVERALL WIDTH0.5000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.6875 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESEXTRA CAPACITY OUTER RACE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
962830Reference document
Same NSN cross-reference
Reference document — Secondary reference
90-1086Reference document
Same NSN cross-reference
Reference document — Secondary reference
B881Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
148493Reference document
Same NSN cross-reference
Reference document — Secondary reference
H5315706 PIECE 51Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
173536Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 21831?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 21831?
21831 is a CIRCUIT CARD ASSEMBLY manufactured by Lindy. It is classified as a NETWORK (10GBE_NIC).
What parts can replace 21831?
There are 8 known substitutes for 21831: 962830, 90-1086, B881 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 21831?
21831 is cataloged in the U.S. Government catalog under NSN 3110-00-108-7944. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 21831