PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 141119R1
141119R1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RING,BEARING,OUTER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.2500 INCHES MINIMUM AND 1.2700 INCHES MAXIMUM IN, overall_width: 0.5310 INCHES MINIMUM AND 0.5330 INCHES MAXIMUM IN, surface_finish: GROUND, special_features: ANGULAR CONTACT RACEWAY, style_designator: OUTER RING, BALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-571-3971, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
141119R1
NSN: 3110-00-571-3971
FSC: 3110
CAGE: 31007 — NAVISTAR INTERNATIONAL CORPORATION DBA NAVISTAR (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.2500 INCHES MINIMUM AND 1.2700 INCHES MAXIMUM IN
overall_width0.5310 INCHES MINIMUM AND 0.5330 INCHES MAXIMUM IN
surface_finishGROUND
special_featuresANGULAR CONTACT RACEWAY
style_designatorOUTER RING, BALL
overall_outside_diameter2.7470 INCHES MINIMUM AND 2.7480 INCHES MAXIMUM IN
NSN3110-00-571-3971
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 141119R1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 2.7470 INCHES MINIMUM AND 2.7480 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 1.2500 INCHES MINIMUM AND 1.2700 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: OUTER RING, BALL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESANGULAR CONTACT RACEWAY
OVERALL OUTSIDE DIAMETER2.7470 INCHES MINIMUM AND 2.7480 INCHES MAXIMUM IN
OVERALL WIDTH0.5310 INCHES MINIMUM AND 0.5330 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SURFACE FINISHGROUND
BORE DIAMETER1.2500 INCHES MINIMUM AND 1.2700 INCHES MAXIMUM IN
STYLE DESIGNATOROUTER RING, BALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
47753-1Interchangeable
interchangeable cross-reference
interchangeable
400054Interchangeable
interchangeable cross-reference
interchangeable
6026-7295-16Interchangeable
interchangeable cross-reference
interchangeable
Z00.N5106301007Interchangeable
interchangeable cross-reference
interchangeable
900859K1Interchangeable
interchangeable cross-reference
interchangeable
LL510-7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 141119R1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 141119R1?
141119R1 is a RING,BEARING,OUTER.
What parts can replace 141119R1?
There are 6 known substitutes for 141119R1: 47753-1, 400054, 6026-7295-16 and 3 more. Substitute compatibility should be verified for your specific system.
Is 141119R1 still available?
141119R1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 141119R1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026