PartsTable / COMPONENT / 13568-CRW1
13568-CRW1
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, outside_diameter: 2.004 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-9075, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
13568-CRW1
NSN: 5330-00-171-9075 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN outside_diameter 2.004 INCHES NOMINAL IN surface_treatment PLASTIC CASE housing_bore_diameter 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN sealing_element_style ANGULAR accommodated_shaft_diameter 1.375 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-171-9075
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 13568-CRW1
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• SEAL WIDTH: 0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• SURFACE TREATMENT: PLASTIC CASE
• ACCOMMODATED SHAFT DIAMETER: 1.375 INCHES NOMINAL IN
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• OUTSIDE DIAMETER: 2.004 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLE ANGULAR SEAL WIDTH 0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT SURFACE TREATMENT PLASTIC CASE CASE STYLE SQUARE ACCOMMODATED SHAFT DIAMETER 1.375 INCHES NOMINAL IN MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT OUTSIDE DIAMETER 2.004 INCHES NOMINAL IN HOUSING BORE DIAMETER 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
135-68 Interchangeable interchangeable cross-reference
interchangeable
9568 Interchangeable interchangeable cross-reference
interchangeable
534927-1 Interchangeable interchangeable cross-reference
interchangeable
11579631 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 13568-CRW1?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13568-CRW1?
13568-CRW1 is a SEAL,PLAIN ENCASED.
What parts can replace 13568-CRW1?
There are 7 known substitutes for 13568-CRW1: 135-68, 9568, 534927-1 and 4 more. Substitute compatibility should be verified for your specific system.
Is 13568-CRW1 still available?
13568-CRW1 is currently cancelled.
Request a Quote — 13568-CRW1