PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 02R200-124-05.5
02R200-124-05.5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 02R200-124-05.5 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-9075, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
02R200-124-05.5
NSN: 5330-00-171-9075
FSC: 5330
CAGE: 96879 — TROSTEL ALBERT PACKING LTD (USA)
SPECIFICATIONS
Part Number02R200-124-05.5
NSN5330-00-171-9075
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 02R200-124-05.5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SURFACE TREATMENT: PLASTIC CASE
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.375 INCHES NOMINAL IN
•
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
•
OUTSIDE DIAMETER: 2.004 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SURFACE TREATMENTPLASTIC CASE
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.375 INCHES NOMINAL IN
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
OUTSIDE DIAMETER2.004 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
135-68Interchangeable
interchangeable cross-reference
interchangeable
9568Interchangeable
interchangeable cross-reference
interchangeable
534927-1Interchangeable
interchangeable cross-reference
interchangeable
13568-CRW1Interchangeable
Same NIIN cross-reference
interchangeable
01-435-0157-5 REV N PIECE 34Interchangeable
Same NIIN cross-reference
interchangeable
11579631Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 02R200-124-05.5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 02R200-124-05.5?
02R200-124-05.5 is a 02R200-124-05.5.
What parts can replace 02R200-124-05.5?
There are 7 known substitutes for 02R200-124-05.5: 135-68, 9568, 534927-1 and 4 more. Substitute compatibility should be verified for your specific system.
Is 02R200-124-05.5 still available?
02R200-124-05.5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 02R200-124-05.5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026