PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 135657
135657 ✓ Verified by PartsTable
Hama · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

- Ideal for on the go thanks to the headset function<br>- Integrated phone function with call answer button and microphone for smartphones<br>- Gold-plated plug with low contact resistance for secure signal transmission<br>- Torsion-free flat cable prevents the formation of knots<br>- Also ideal for MP3 players<br>- Call management functions as far as supported by the telephone (call answer/end, activation of voice dialling)<br>- Remote functions play/pause/title forward/title back if supported by the telephone This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-533-8452, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
135657
NSN: 5310-00-533-8452
FSC: 5310
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter1.450 INCHES MINIMUM AND 1.460 INCHES MAXIMUM IN
thread_class2B
nut_thickness0.960 INCHES NOMINAL IN
thread_seriesUNEF
special_featuresDUTY CLASS LM SERIES
thread_directionRIGHT-HAND
drive_point_depth0.140 INCHES NOMINAL IN
drive_point_width0.340 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
nominal_thread_size1.375 INCHES IN
NSN5310-00-533-8452
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 135657 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6382 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DRIVE POINT QUANTITY: 6
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES: UNEF
•
THREAD QUANTITY PER INCH: 18
•
NOMINAL THREAD SIZE: 1.375 INCHES IN
•
NUT THICKNESS: 0.960 INCHES NOMINAL IN
•
NUT STYLE: ROUND
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6382 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DRIVE POINT QUANTITY6
THREAD DIRECTIONRIGHT-HAND
THREAD SERIESUNEF
THREAD QUANTITY PER INCH18
NOMINAL THREAD SIZE1.375 INCHES IN
NUT THICKNESS0.960 INCHES NOMINAL IN
NUT STYLEROUND
DRIVE POINT DEPTH0.140 INCHES NOMINAL IN
MATERIALSTEEL COMP 4140 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
1789755Interchangeable
interchangeable cross-reference
interchangeable
M782AInterchangeable
interchangeable cross-reference
interchangeable
10A7051Interchangeable
interchangeable cross-reference
interchangeable
5310H34-015Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 135657?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 135657?
135657 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Hama.
What parts can replace 135657?
There are 4 known substitutes for 135657: 1789755, M782A, 10A7051 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 135657?
135657 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-533-8452. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 135657

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026