PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5310H34-015
5310H34-015 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OVERALL, nut_style: ROUND, nut_diameter: 1.450 INCHES MINIMUM AND 1.460 INCHES MAXIMUM IN, thread_class: 2B, nut_thickness: 0.960 INCHES NOMINAL IN, thread_series: UNEF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-533-8452, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310H34-015
NSN: 5310-00-533-8452
FSC: 5310
CAGE: 81996 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OVERALL
nut_styleROUND
nut_diameter1.450 INCHES MINIMUM AND 1.460 INCHES MAXIMUM IN
thread_class2B
nut_thickness0.960 INCHES NOMINAL IN
thread_seriesUNEF
thread_directionRIGHT-HAND
drive_point_depth0.140 INCHES NOMINAL IN
drive_point_width0.340 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
nominal_thread_size1.375 INCHES IN
drive_point_quantity6
NSN5310-00-533-8452
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5310H34-015 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6382 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DRIVE POINT QUANTITY: 6
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES: UNEF
•
THREAD QUANTITY PER INCH: 18
•
NOMINAL THREAD SIZE: 1.375 INCHES IN
•
NUT THICKNESS: 0.960 INCHES NOMINAL IN
•
NUT STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6382 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DRIVE POINT QUANTITY6
THREAD DIRECTIONRIGHT-HAND
THREAD SERIESUNEF
THREAD QUANTITY PER INCH18
NOMINAL THREAD SIZE1.375 INCHES IN
NUT THICKNESS0.960 INCHES NOMINAL IN
NUT STYLEROUND
DRIVE POINT DEPTH0.140 INCHES NOMINAL IN
MATERIALSTEEL COMP 4140 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
1789755Interchangeable
interchangeable cross-reference
interchangeable
M782AInterchangeable
interchangeable cross-reference
interchangeable
10A7051Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5310H34-015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310H34-015?
5310H34-015 is a NUT,PLAIN,ROUND.
What parts can replace 5310H34-015?
There are 3 known substitutes for 5310H34-015: 1789755, M782A, 10A7051. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310H34-015?
5310H34-015 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-533-8452. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310H34-015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026