PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13217E6624
13217E6624 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hardness_rating: 80.0 SHORE DUROMETER A MINIMUM AND 90.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 6.435 INCHES MINIMUM AND 6.495 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 6.265 INCHES MINIMUM AND 6.315 INCHES MAXIMUM IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-408-4558, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13217E6624
NSN: 5330-00-408-4558
FSC: 5330
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
hardness_rating80.0 SHORE DUROMETER A MINIMUM AND 90.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter6.435 INCHES MINIMUM AND 6.495 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter6.265 INCHES MINIMUM AND 6.315 INCHES MAXIMUM IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationASTM D2000 2BG815F67EA1 ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5330-00-408-4558
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13217E6624 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 6.265 INCHES MINIMUM AND 6.315 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 6.435 INCHES MINIMUM AND 6.495 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
•
HARDNESS RATING: 80.0 SHORE DUROMETER A MINIMUM AND 90.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BG815F67EA1 ASSN STD ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER6.265 INCHES MINIMUM AND 6.315 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
OUTSIDE DIAMETER6.435 INCHES MINIMUM AND 6.495 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
HARDNESS RATING80.0 SHORE DUROMETER A MINIMUM AND 90.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BG815F67EA1 ASSN STD ALL MATERIAL RESPONSES OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
MIL-STD-417AGR SC512ABFInterchangeable
interchangeable cross-reference
interchangeable
MIL-R-3065EInterchangeable
interchangeable cross-reference
interchangeable
00737SH 25 ST 164Interchangeable
interchangeable cross-reference
interchangeable
D346-268Interchangeable
interchangeable cross-reference
interchangeable
82628ASPC82632AInterchangeable
interchangeable cross-reference
interchangeable
81576PC82632AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13217E6624?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13217E6624?
13217E6624 is a GASKET.
What parts can replace 13217E6624?
There are 19 known substitutes for 13217E6624: MIL-STD-417AGR SC512ABF, MIL-R-3065E, 00737SH 25 ST 164 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13217E6624?
13217E6624 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-408-4558. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13217E6624

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026