PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13214E7063
13214E7063 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT, case_style: SQUARE, seal_width: 0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE CASE, housing_bore_diameter: 1.375 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-788-0440, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13214E7063
NSN: 5330-00-788-0440
FSC: 5330
CAGE: 66289 — WISCONSIN MOTORS, LLC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
case_styleSQUARE
seal_width0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE CASE
housing_bore_diameter1.375 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.812 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE CASE
NSN5330-00-788-0440
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13214E7063 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
217333PC4Interchangeable
interchangeable cross-reference
interchangeable
Z33S44367-1530Interchangeable
interchangeable cross-reference
interchangeable
8030Interchangeable
interchangeable cross-reference
interchangeable
13214E7063Interchangeable
interchangeable cross-reference
interchangeable
05R124-52-5CInterchangeable
interchangeable cross-reference
interchangeable
ERJ228Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13214E7063?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13214E7063?
13214E7063 is a SEAL,PLAIN ENCASED.
What parts can replace 13214E7063?
There are 7 known substitutes for 13214E7063: 217333PC4, Z33S44367-1530, 8030 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13214E7063?
13214E7063 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-788-0440. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13214E7063

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026