PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Z33S44367-1530
Z33S44367-1530 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.312 INCHES NOMINAL IN, housing_bore_diameter: 1.375 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.812 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-1913, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z33S44367-1530
NSN: 5330-00-292-1913
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.312 INCHES NOMINAL IN
housing_bore_diameter1.375 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.812 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-292-1913
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Z33S44367-1530 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 1.375 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT DIAMETER: 0.812 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER1.375 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SEAL WIDTH0.312 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER0.812 INCHES NOMINAL IN
MATERIALSTEEL CASE
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
8030Interchangeable
interchangeable cross-reference
interchangeable
245296Interchangeable
interchangeable cross-reference
interchangeable
BM379Interchangeable
interchangeable cross-reference
interchangeable
232813-2Interchangeable
interchangeable cross-reference
interchangeable
7B2380Interchangeable
interchangeable cross-reference
interchangeable
11790Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Z33S44367-1530?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z33S44367-1530?
Z33S44367-1530 is a SEAL,PLAIN ENCASED.
What parts can replace Z33S44367-1530?
There are 20 known substitutes for Z33S44367-1530: 8030, 245296, BM379 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Z33S44367-1530?
Z33S44367-1530 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-1913. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z33S44367-1530

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026