PartsTable
Technical Data Sheet
PartsTable / MRO / 131084
131084 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BRACKET ASSEMBLY is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.115 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.226 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, material_thickness: 0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-1084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 131084
NSN: 5310-00-013-1084
FSC: 5310
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.115 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.226 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
material_thickness0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
nondefinitive_spec/std_data3 STYLE AND A CLASS
material_document_and_classificationFED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 MIL STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-013-1084
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 131084 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
OUTSIDE DIAMETER: 0.226 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 3 STYLE AND A CLASS
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL THICKNESS: 0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 MIL STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
OUTSIDE DIAMETER0.226 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA3 STYLE AND A CLASS
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL THICKNESS0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
HOLE DIAMETER0.115 INCHES MINIMUM AND 0.124 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 MIL STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
FFW84CLASSASTYLE3Interchangeable
interchangeable cross-reference
interchangeable
DX253Interchangeable
interchangeable cross-reference
interchangeable
34846S2Interchangeable
interchangeable cross-reference
interchangeable
LWZ305Interchangeable
interchangeable cross-reference
interchangeable
MW6-10Interchangeable
interchangeable cross-reference
interchangeable
120638Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 131084?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 131084?
131084 is a BRACKET ASSEMBLY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 131084?
There are 29 known substitutes for 131084: FFW84CLASSASTYLE3, DX253, 34846S2 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 131084?
131084 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-1084. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 131084

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026