PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13084684
13084684 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.375 INCHES NOMINAL IN, height: 0.130 INCHES NOMINAL IN, length: 0.314 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, hole_diameter: 0.125 INCHES NOMINAL IN, furnished_items: LOCKNUT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-729-6763, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13084684
NSN: 5340-00-729-6763
FSC: 5340
CAGE: 58260 — PROGRAM MANAGER ADVANCED ATTACK HELICOPTER BARCOM AMCPM-AAH (USA)
SPECIFICATIONS
width0.375 INCHES NOMINAL IN
height0.130 INCHES NOMINAL IN
length0.314 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
hole_diameter0.125 INCHES NOMINAL IN
furnished_itemsLOCKNUT
NSN5340-00-729-6763
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13084684 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
WIDTH: 0.375 INCHES NOMINAL IN
•
LENGTH: 0.314 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING
•
HEIGHT: 0.130 INCHES NOMINAL IN
•
FURNISHED ITEMS: LOCKNUT
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.125 INCHES NOMINAL IN
WIDTH0.375 INCHES NOMINAL IN
LENGTH0.314 INCHES NOMINAL IN
END ITEM IDENTIFICATIONW/S:SUPPORT EQUIPMENT, B-1 AIRCRAFT; STREAM (STD. TENSIONED REPLENISHMENT AT SEA METHOD); MISSILE, AIR-TO-AIR, SPARROW (AIM 7); RADIO TERMINAL SET AN/SRQ-4; RADAR SET, AN/TPN-18; MISSILE, AIR INTERCEPT, SIDEWINDER (AIM-9); CLOSE IN WEAPON SYSTEM (CIWS-PHALANX); SONAR SIGNAL PROCESSING SYS, AN/SQQ-28(V); AIRCRAFT, (AC-130H, MC-130H, EC-130E, HHC-130)
MATERIALSTEEL CORROSION RESISTING
HEIGHT0.130 INCHES NOMINAL IN
FURNISHED ITEMSLOCKNUT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
18M6075Upgraded Successor
successor cross-reference
successor
Z24-0001-001Upgraded Successor
successor cross-reference
successor
122Upgraded Successor
successor cross-reference
successor
076-003854-014Upgraded Successor
successor cross-reference
successor
F2NY-500-0Upgraded Successor
successor cross-reference
successor
423562Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13084684?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13084684?
13084684 is a CLAMP,SYNCHRO.
What parts can replace 13084684?
There are 25 known substitutes for 13084684: 18M6075, Z24-0001-001, 122 and 22 more. Substitute compatibility should be verified for your specific system.
Is 13084684 still available?
13084684 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13084684

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026