PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Z24-0001-001
Z24-0001-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: STEEL, head_height: 0.060 INCHES NOMINAL IN, overall_height: 0.230 INCHES NOMINAL IN, style_designator: STANDARD, surface_treatment: NICKEL, head_outside_diameter: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-485-9698, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Z24-0001-001
NSN: 5340-00-485-9698
FSC: 5340
CAGE: 14304 — L3HARRIS TECHNOLOGIES, INC. DBA HARRIS CORP DIV HARRIS DEFENSE COMMUNICATIONS (USA)
SPECIFICATIONS
materialSTEEL
head_height0.060 INCHES NOMINAL IN
overall_height0.230 INCHES NOMINAL IN
prong_quantity8
style_designatorSTANDARD
surface_treatmentNICKEL
head_outside_diameter0.500 INCHES NOMINAL IN
prong_outside_diameter0.430 INCHES NOMINAL IN
hole_accommodation_diameter0.380 INCHES NOMINAL IN
material_accommodated_thickness0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
NSN5340-00-485-9698
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: Z24-0001-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: NICKEL
•
STYLE DESIGNATOR: STANDARD
•
MATERIAL: STEEL
•
PRONG QUANTITY: 8
•
HEAD HEIGHT: 0.060 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
PRONG OUTSIDE DIAMETER: 0.430 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTNICKEL
STYLE DESIGNATORSTANDARD
MATERIALSTEEL
OVERALL HEIGHT0.230 INCHES NOMINAL IN
PRONG QUANTITY8
HEAD HEIGHT0.060 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
PRONG OUTSIDE DIAMETER0.430 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER0.380 INCHES NOMINAL IN
HEAD OUTSIDE DIAMETER0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
1784019PC2Upgraded Successor
successor cross-reference
successor
7053039P1Upgraded Successor
successor cross-reference
successor
9147C5027-2Upgraded Successor
successor cross-reference
successor
12-2Upgraded Successor
successor cross-reference
successor
31140562Upgraded Successor
successor cross-reference
successor
18M6075Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy Z24-0001-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Z24-0001-001?
Z24-0001-001 is a BUTTON,PLUG.
What parts can replace Z24-0001-001?
There are 6 known substitutes for Z24-0001-001: 1784019PC2, 7053039P1, 9147C5027-2 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Z24-0001-001?
Z24-0001-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-485-9698. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Z24-0001-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026