PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12NBC1822YZPANG25
12NBC1822YZPANG25 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.7500 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 1.1250 INCHES NOMINAL IN, outer_ring_width: 1.0000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2826, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12NBC1822YZPANG25
NSN: 3110-00-227-2826
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.7500 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width1.1250 INCHES NOMINAL IN
outer_ring_width1.0000 INCHES NOMINAL IN
special_featuresOIL HOLE AND GROOVE IN OUTER AND INNER RINGS
style_designatorCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
overall_outside_diameter1.3750 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-00-227-2826
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 12NBC1822YZPANG25 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INNER RING WIDTH: 1.1250 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
RETAINER FABRICATION METHOD: PRESSED
•
OUTER RING WIDTH: 1.0000 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
INNER RING WIDTH1.1250 INCHES NOMINAL IN
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
RETAINER FABRICATION METHODPRESSED
OUTER RING WIDTH1.0000 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER AND INNER RINGS
ALIGNMENT TYPERIGID
BORE DIAMETER0.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
AS24461Interchangeable
interchangeable cross-reference
interchangeable
505-20Interchangeable
interchangeable cross-reference
interchangeable
MS24461-20Interchangeable
interchangeable cross-reference
interchangeable
3NBC511ZPInterchangeable
interchangeable cross-reference
interchangeable
505-3Interchangeable
interchangeable cross-reference
interchangeable
MS24461-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12NBC1822YZPANG25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12NBC1822YZPANG25?
12NBC1822YZPANG25 is a BEARING,ROLLER,NEEDLE.
What parts can replace 12NBC1822YZPANG25?
There are 32 known substitutes for 12NBC1822YZPANG25: AS24461, 505-20, MS24461-20 and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12NBC1822YZPANG25?
12NBC1822YZPANG25 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2826. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12NBC1822YZPANG25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026