The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYPROPYLENE, block_height: 0.61 INCHES MINIMUM AND 0.61 INCHES MINIMUM AND 0.73 INCHES MAXIMUM0.73 INCHES MAXIMUM IN, overall_width: 1.13 INCHES MINIMUM AND 1.13 INCHES MINIMUM AND 1.25 INCHES MAXIMUM1.25 INCHES MAXIMUM IN, overall_length: 1.82 INCHES MINIMUM AND 1.82 INCHES MINIMUM AND 1.94 INCHES MAXIMUM1.94 INCHES MAXIMUM IN, special_features: MOUNTING HOLES HAVE .31 INCH THRU DIAMETER COUNTERBORED TO .47 INCHES .31 INCHES DEEP. IN, style_designator: RECTANGULAR.
This part is cataloged in the U.S. Government catalog under NSN 5340-01-645-4675, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
12413109-06
NSN:5340-01-645-4675 FSC:5340 — Hardware, Commercial CAGE:19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
material
PLASTIC POLYPROPYLENE
block_height
0.61 INCHES MINIMUM AND 0.61 INCHES MINIMUM AND 0.73 INCHES MAXIMUM0.73 INCHES MAXIMUM IN
overall_width
1.13 INCHES MINIMUM AND 1.13 INCHES MINIMUM AND 1.25 INCHES MAXIMUM1.25 INCHES MAXIMUM IN
overall_length
1.82 INCHES MINIMUM AND 1.82 INCHES MINIMUM AND 1.94 INCHES MAXIMUM1.94 INCHES MAXIMUM IN
special_features
MOUNTING HOLES HAVE .31 INCH THRU DIAMETER COUNTERBORED TO .47 INCHES .31 INCHES DEEP. IN
style_designator
RECTANGULAR
mounting_facility
UNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter
0.88 INCHES NOMINAL ALL HOLES IN
clamping_hole_quantity
1
mounting_hole_quantity
22
end_item_identification
2320-01-552-77622320-01-552-7762
cable_diameter_for_which_designed
0.88 INCHES NOMINAL ALL HOLES IN
NSN
5340-01-645-4675
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 22
•
CLAMPING HOLE QUANTITY: 1
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.88 INCHES MINIMUM AND 1.00 INCHES MAXIMUM IN
•
BLOCK HEIGHT: 0.61 INCHES MINIMUM AND 0.61 INCHES MINIMUM AND 0.73 INCHES MAXIMUM0.73 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RECTANGULAR
•
CLAMPING HOLE DIAMETER: 0.88 INCHES NOMINAL ALL HOLES IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY
22
CLAMPING HOLE QUANTITY
1
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
0.88 INCHES MINIMUM AND 1.00 INCHES MAXIMUM IN
BLOCK HEIGHT
0.61 INCHES MINIMUM AND 0.61 INCHES MINIMUM AND 0.73 INCHES MAXIMUM0.73 INCHES MAXIMUM IN
STYLE DESIGNATOR
RECTANGULAR
OVERALL LENGTH
1.82 INCHES MINIMUM AND 1.82 INCHES MINIMUM AND 1.94 INCHES MAXIMUM1.94 INCHES MAXIMUM IN
OVERALL WIDTH
1.13 INCHES MINIMUM AND 1.13 INCHES MINIMUM AND 1.25 INCHES MAXIMUM1.25 INCHES MAXIMUM IN
CLAMPING HOLE DIAMETER
0.88 INCHES NOMINAL ALL HOLES IN
CABLE DIAMETER FOR WHICH DESIGNED
0.88 INCHES NOMINAL ALL HOLES IN
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH
0.53 INCHES MINIMUM AND 0.53 INCHES MINIMUM AND 0.65 INCHES MAXIMUM0.65 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12413109-06?
12413109-06 is a CLAMP,BLOCK,SECTION.
What parts can replace 12413109-06?
There are 3 known substitutes for 12413109-06: 12413109, 12413109-006, HR3L 22.0P PP/CP. Substitute compatibility should be verified for your specific system.
What is the NSN for 12413109-06?
12413109-06 is cataloged in the U.S. Government catalog under NSN 5340-01-645-4675. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.