PartsTable
Technical Data Sheet
Download PDF

12413109 — CLAMP,BLOCK,SECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12413109: CLAMP,BLOCK,SECTION.

The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYPROPYLENE, block_height: 0.61 INCHES MINIMUM AND 0.61 INCHES MINIMUM AND 0.73 INCHES MAXIMUM0.73 INCHES MAXIMUM IN, overall_width: 1.13 INCHES MINIMUM AND 1.13 INCHES MINIMUM AND 1.25 INCHES MAXIMUM1.25 INCHES MAXIMUM IN, overall_length: 1.82 INCHES MINIMUM AND 1.82 INCHES MINIMUM AND 1.94 INCHES MAXIMUM1.94 INCHES MAXIMUM IN, special_features: MOUNTING HOLES HAVE .31 INCH THRU DIAMETER COUNTERBORED TO .47 INCHES .31 INCHES DEEP. IN, style_designator: RECTANGULAR.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-645-4675, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12413109
NSN: 5340-01-645-4675
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialPLASTIC POLYPROPYLENE
block_height0.61 INCHES MINIMUM AND 0.61 INCHES MINIMUM AND 0.73 INCHES MAXIMUM0.73 INCHES MAXIMUM IN
overall_width1.13 INCHES MINIMUM AND 1.13 INCHES MINIMUM AND 1.25 INCHES MAXIMUM1.25 INCHES MAXIMUM IN
overall_length1.82 INCHES MINIMUM AND 1.82 INCHES MINIMUM AND 1.94 INCHES MAXIMUM1.94 INCHES MAXIMUM IN
special_featuresMOUNTING HOLES HAVE .31 INCH THRU DIAMETER COUNTERBORED TO .47 INCHES .31 INCHES DEEP. IN
style_designatorRECTANGULAR
mounting_facilityUNTHREADED HOLE(S)UNTHREADED HOLE(S)
clamping_hole_diameter0.88 INCHES NOMINAL ALL HOLES IN
clamping_hole_quantity1
mounting_hole_quantity22
end_item_identification2320-01-552-77622320-01-552-7762
cable_diameter_for_which_designed0.88 INCHES NOMINAL ALL HOLES IN
NSN5340-01-645-4675
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12413109 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 22
•
CLAMPING HOLE QUANTITY: 1
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.88 INCHES MINIMUM AND 1.00 INCHES MAXIMUM IN
•
BLOCK HEIGHT: 0.61 INCHES MINIMUM AND 0.61 INCHES MINIMUM AND 0.73 INCHES MAXIMUM0.73 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RECTANGULAR
•
CLAMPING HOLE DIAMETER: 0.88 INCHES NOMINAL ALL HOLES IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY22
CLAMPING HOLE QUANTITY1
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER0.88 INCHES MINIMUM AND 1.00 INCHES MAXIMUM IN
BLOCK HEIGHT0.61 INCHES MINIMUM AND 0.61 INCHES MINIMUM AND 0.73 INCHES MAXIMUM0.73 INCHES MAXIMUM IN
STYLE DESIGNATORRECTANGULAR
OVERALL LENGTH1.82 INCHES MINIMUM AND 1.82 INCHES MINIMUM AND 1.94 INCHES MAXIMUM1.94 INCHES MAXIMUM IN
OVERALL WIDTH1.13 INCHES MINIMUM AND 1.13 INCHES MINIMUM AND 1.25 INCHES MAXIMUM1.25 INCHES MAXIMUM IN
CLAMPING HOLE DIAMETER0.88 INCHES NOMINAL ALL HOLES IN
CABLE DIAMETER FOR WHICH DESIGNED0.88 INCHES NOMINAL ALL HOLES IN
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH0.53 INCHES MINIMUM AND 0.53 INCHES MINIMUM AND 0.65 INCHES MAXIMUM0.65 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
12413109-06Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
12413109-006Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HR3L 22.0P PP/CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 12413109?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12413109?
12413109 is a CLAMP,BLOCK,SECTION.
What parts can replace 12413109?
There are 3 known substitutes for 12413109: 12413109-06, 12413109-006, HR3L 22.0P PP/CP. Substitute compatibility should be verified for your specific system.
What is the NSN for 12413109?
12413109 is cataloged in the U.S. Government catalog under NSN 5340-01-645-4675. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12413109

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.