PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 12410PC422
12410PC422 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.488 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN, pin_overall_diameter: 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.010 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3690, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12410PC422
NSN: 5315-00-010-3690
FSC: 5315
CAGE: 29899 — CALGON CARBON UV TECHNOLOGIES LLC DBA HYDE MARINE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length0.488 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
pin_overall_diameter0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.010 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-010-3690
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 12410PC422 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL DIAMETER: 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
PIN OVERALL LENGTH: 0.488 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL OVERALL
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL DIAMETER0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
PIN OVERALL LENGTH0.488 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL OVERALL
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
72798S7Interchangeable
interchangeable cross-reference
interchangeable
16333Interchangeable
interchangeable cross-reference
interchangeable
103690Interchangeable
interchangeable cross-reference
interchangeable
1578-1Interchangeable
interchangeable cross-reference
interchangeable
112006-2Interchangeable
interchangeable cross-reference
interchangeable
112006Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 12410PC422?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12410PC422?
12410PC422 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 12410PC422?
There are 17 known substitutes for 12410PC422: 72798S7, 16333, 103690 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 12410PC422?
12410PC422 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3690. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12410PC422

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026